LSL

X-Bar Universal clamps for fitting an X Bar Handlebar into 22mm.

For the use of X-Bar handlebars (28.6 mm) LSL offers the necessary clamps for screwing in the original mounting points of the upper fork bridge.

These clamps are required by 22.2 models convert to 28,6mm.

The clamps are CNC machined from high quality aluminum solid material.
They replace the series clamps to another level and to achieve a better impression.

They can be mounted in the original attachment points with center fitting M10 x 1.25 mm bolts.
For models with rubber mounting these remains.

To determine the screw length:
Measure the length, the look the original screws from the original mounting clamps out.
These add 16mm (= distance screw head-pad to the bottom edge LSL-spindle clamp) and possibly the thickness of the selected pad.

Raise Shimmings with +15mm or + 25mm can be ordered for an Addprice from 8,00€.

Use this shimmings for raise the X-Bar clamps.
They will be mounted between your upper triple tree and the X-Bar clamps. Please check the length of your screws!

ATTENTION!
For motorcycles having a permanently cast 22.2mm handlebar support using this adapter clamps!

Important: For many Models is an modell specific clamps set necessary!
Please tell Model and Year.

By the Models

1. Kawasaki Z1000 Year from 2014-
2. Yamaha MT07 Year from 2014-
3. Yamaha MT09 Year from 2014-

is a mixer bracket and aluminum cover included,
Here there is an additional charge of € 40.00

Not for all models a conversion is possible as can further be necessary accessories.
Gladly we advise you also before buying
Please send inquiries to: [email protected] or in shopping cart per offer inquiry.

Remark: product will be delivered with German legitimation
Material: aluminium CNC machined, black or silver anodised
Diameter: 28,6 mm X-Bar
Fastening: central screwing at original holes
Dimensions: 45 mm from bottom to middle of clamping

The model-specific X-Bar clamps are installed at the original mounting points. Thus it can be mounted on many models with original 22.2mm handlebar an X-Bar handlebar. For models with standard rubber bearing these remains.
Depending on the model, the handlebar position from -50mm to + 30mm changes, the value of your motorcycle is indicated by offset

Für Aprilia	Typ	Year from	Offset in mm
Shiver 750	RA	ab 2008	+15
Tuono	RR	2006-2010	-2
Für BMW
R1200R	R1ST	2007-2011	+25
F700GS	E8GS	ab 2013	-3
Für Buell XB.9S/125	XB1	alle	+25
Für Ducati
Monster 696 und 1100	M5	ab 2008	+10
Multistrada 1200	A2	ab 2010	+5
Für Honda
Hornet 600	PC41	ab 2007	+25
CBF 600S	PC43	ab 2008	+25
CBF 1000	SC58	ab 2006	+30
CBF 1000F	SC64	ab 2010	+25
CB 1000R	SC60	ab 2013	+10
CB 1100	SC65	ab 2013	+10
CB 1300	SC54	ab 2013	+10
Für Kawasaki
ER6N	ER650C	ab 2009	+15
ER6F	EX650E	ab 2012	+15
Z 750		ab 2004	+15
Z1000	ZRT00A/B	2003-2009	+15
Versys 1000	LZT00A/1	ab 2012	20
Für KTM 125/200/390	Duke C3	ab 2013	+10
Für Moto Guzzi
V7	LW	ab 2008	+17
Griso 1100	LS	ab 2006	-10
Für Suzuki
GSR 600	WVB9	ab 2006	+25
GSF 600 Bandit	GN77B/AB	1995-2004	+25
DL 650	WVB1	ab 2004	+25
GSF 650 Bandit	WVCJ	ab 2007	+10
SV 650N	WVBY	2003-2008	+25
SVF650 Gladius	WVCX	ab 2009	+25
GSR 750	C5	ab 2011	+10
SV 1000N	WVBX	ab 2003	+3
DL 1000 V-Strom	DD	ab 2014	+13
GSF 1250 Bandit	GV75A/A9	alle	+12
GSF 1250F Bandit	WVCR	ab 2007	+12
GSX 1250F	WVCH13	ab 2010	+10
B King	WVCR	ab 2008	-8
GSX 1400	WVBN	alle	+10
Für Triumph
Street Triple 675	D67D	2008-2012	+10
Bonneville	986MF	ab 2008	+10/+35
Scrambler	986MG	ab 2006	+10/+35
Speed Triple		1997-2004	+3
Speed Triple 1050	515NV	ab 2011	+11
Tiger 1050	115NG	2007-2011	+11
Für Yamaha
XJ6 Diversion	RJ19	ab 2009	+10
FZ6	RJ07/14	ab 2003	+25
FZ8/ Fazer	RN25	ab 2010	+20
MT09	RN29	ab 2014	+5/+25
FZ1/Fazer	RN16	ab 2006	-30/ABS-5
FZS 1000 Fazer	RN06/14	ab 2005	-5
BT1000 Bulldog	RP05	alle	-50
XJR1200/1300	alle	alle	+20
MT01	RP12/18	alle	-13/-38

Please note: You may need longer brake and throttle cables.
We are happy to advise you and put together a complete set of handlebars and all necessary accessories.
Kontakt: Technik Schwabenmax